Walnut Shell & Corncob are soft blasting media processed from natural hardfibers of walnut or corn. The major advantage is that fragile components can be cleaned without marking or etching the components' blasted surfaces.

They are suitable for cleaning autoMobile super chargers and turbine blades, removing unwanted flash residue produced during the moulding process from semi-conductor integrated circuit package lead frames without damaging or pitting the package surface. They are also used in power generation stations, turbine overhaul factories and the aerospace industry.

Besides these, walnut Shell is widely used for cleaning moulds, motor armatures and motor drives prior to rewinding. Corncob is very light, soft and absorbent. It can be used for cleaning delicate surfaces or brass/brick/stone/wood, engines and engine components as well as mass finishing processes for drying and absorbing water, oil or wax from processed parts and also for fine polishing or brightening of parts.

Specifications:

Item	Walnut Shell	Corncob
Density	1.28g/cc	1.15g/cc
Hardness	2.5-3.0 MOH	2.0-2.5 MOH
Fiber Content	90.4	94.4
Oil Content	0.4	0.2
Water Content	8.7	5.4
Acidity pH	4-6	5-7
Remark	1.Available in mixed grits based upon sieve screen measurement. 2.Absorbent quality for drying or degreasing.

  
Size:

3P6 5.0-4.0mm	3P8 4.0-3.0mm	3P10 3.0-2.5mm	3P12 2.5-2.0mm
3P14 2.0-1.5mm	3P16 1.5-1.0mm	3P20 1.0-0.7mm	3P24 0.7-0.5mm
3P30 0.5-0.3mm	3P36 0.3-0.1mm

Othe size also available upon request.

Packing:

 20kgs / bag, or can be packed on request.